EKOL MAJOR BLANK GUN + 10 BLANKS + HOLSTER - Tophatter's Army Deals

In this combo you will receive the following : 

1 X Ekol Major Blank Gun
10 X V-Sport Cartridges
1 X Ambidextrous IWB Holster 

This is the EKOL MAJOR, a lovely, if not excellent, replica of the WALTHER PPK pistol. As with all EKOL branded pistols, they are high engineering standard, the build quality on them are sound, all moving parts actuate positively and the finish on them are durable. EKOL is one of the only blank gun manufacturers we know of, that blues their blank guns and serializes the frames using dot matrix print.

Consideration is also accorded to human ergonomy and replica realism, whilst ensuring the internal components are robust and made of materials that can withstand abuse.

The overall finish on their products is on par with ZORAKI,  the ease of use is disputed as being in a close 2nd place to ZORAKI, whereas the versatility of their product lineup is equal to ZORAKI.

***

Key Features;

• Blued finish
• Good build tolerances
• Compact vintage pistol, single stack width, w/ broadened gripstocks to permit an easier grip for those with larger hands. The left gripstock features a running welt that the right hand's thumb rests comfortably upon.
• 7+1 magazine capacity - features withness holes on the side of the magazine body to track your bullet 
• Supplied w/ a rust-free flare tip adapter
• Hammer fired
• Single action only
• Field strips exactly like a MAKAROV / WALTHER PPK
• Enlarged tab at the base of the magwell for easy magazine release
• Safety lever acts as imnprovised decocker - The safety just obstructs the path between the butt of the firing pin and the hammer face.
• Floor plate on the magazine acts as a stopper to prevent one's hand from slipping off.
• VERY LOVELY gat - comparable with the BRUNI NEW PISTOL.
• Professionally-looking pistol case supplied with, featuring sliding clips w/ clear LOCK/UNLOCK indicators. Crisply branded as well. 

***

One of the really finer PPK replicas that you'll be able to pick up from the retail market - wasn't too many years ago even that you could pick up the KWC PM 4.5mm full blowback for that same price!

The presentation of this pistol really is lovely and superb!

When racking the slide, you'll hear the realistic sound it makes once the slide is extended to its rearmost extremity, then released to its forwardly reset position. Really thrilling!

The pistol fits and sits quaintly in the hand, featuring a tiny set of open sights that do take a little getting used to.
The cocking serrations are old-school too - thin upright grooves w/ a faint slant and moderately coarse - they do work just fine and w/ a firm purchase on the slide, the blowback spring is easily defeated.
The safety lever likewise is seated on the left hand face of the slide, specifically the rear, rotating between the 9 'o clock position and the 7 'o clock position. This safety lever doubles up as an improvised decocking device in that, it shifts a firing pin blocker into place behind the firing pin so that, if the hammer is withdrawn and released from the sear, that it will not strike the firing pin butt. We can understand the utility of this - even if the pistol were to be dropped and the hammer would be bumped off the sear, then the firing pin will still be guarded / be rendered inaccessible.

The sights are nice and nimble in dimension - minute and does take a wee-bit of getting used to. Not the easiest to use, but certainly vintage.

We previously indicated the finish on this pistol as being truly superb and indeed, even after days of handling a given MAJOR model, the finish remains, whereas the typical paint coat you'd find on these, would have started giving way - that being so, your pistol will retain its 'brand new' look for a length of time, before any real noticeable deterioration would become apparent on the finish.

The pistol is single action only - Meaning, you'll have to rack the slide or cock the hammer in order to be able to discharge the pistol - the hammer will not budge otherwise. The hammer itself is very reminescent of the PPK type, which has the ball ridge. The pinhole on the hammer isn't thorough, but looks the part. The totality of the exposed ball circumference is cross-serrated.

The baseplate on the magazine does jut out forwardly, providing a nice angular basis that acts as a grip stopper for your hand, preventing your small finger from otherwise sitting too uncomfortably on the pistol or sliding off.  

The spring on the broad extractor arm is also quite stiff, which allows for slightly more reliable extraction. The extractor arm here, is a thick one piece, instead of two thin pieces, as is in the case of alot of other 84FS-type blank guns.

The beaver tail is a short stubby type, which is ample and doesn't counteract the otherwise 'bobcat' aesthetic on the pistol. It sufficiently juts out to the extent that an adult's hand shouldn't be able to slip up and over it.

The barrel / breech assembly is welded to the frame of the pistol, making it a complete single piece assembly. Lacking an obvious blowback rod, the bblowback spring, you might ask, sleeves / fits around the barrel and resets the slide as such.

Technical Specifications;