S2G FrankenREP V2 Balisong BUILD-A-KNIFE - (part 3 of 5) spacers

Replicant clone Channel Spacers Titanium, Carbon Fiber or G10 for Franken REP V2 Butterfly Knife. Build A Knife Part 3 (pick your spacers). Standard TI or custom channel spacers available in Black, White, Red, Rainbow, Fade, Blue, Yellow, Green, Grey, Pink or Purple. THIS LISTING IS STILL UNDER CONSTRUCTION. Some pictures are from V1 used only as color reference. YOU MUST HAVE ALL 5 PARTS IN YOUR CART if you want us to bring Frankie to life. Otherwise, items will be shipped as 'spare parts'. Need help? Just call us!

The wait is over, and S2G has really gone MAD this time. Endless options to fit every user and style! How can we possibly list sooo many variants?!?!? We can't. Please CALL US to assist with your build... Mon-Fri, 9am-4pm est 330-714-1788

Enter our Parts Laboratory and stitch together your own custom Frankie HERE....

This is a BRAND NEW version not available anywhere else (we are the manufacturer and designer of the new mods). Featured as one of S2G's highest quality  butterfly knives.

Frankie may need some extra time to resurrect, as each piece is built custom by S2G. These WILL SELL OUT.... order yours today while they last! The ULTIMATE PLATFORM TO MOD !!

TITANIUM spacers:

• 'BRS Replicant'  Inspired design (NOT authentic), made by a High End factory in China.
• Milled Titanium stock/standard spacers - 4.2 mm thickness
• TI spacer weight: 3.5g/ea
• Compatible with optional T-latch
• Combined with optional handle weights changes balance
• Separate handle weights are available here....
• Choose your ano/color (typically matched with liner color)

CHANNEL spacers:

• G10 or Carbon Fiber, changes mostly sound 
• Also adds extra grip with lower jimping 
• Channel Spacer Weight: varies depending on material/thickness
  
• Built-in weights are removable to adjust balance
• NOT compatible with T-latch
• Includes: 1 set of spacers (2 pcs)  
• Need spare hardware? Click here...

***Need Threadlocker? Oil? Removal Tool? NO Threadlocker has been applied. To hold your tune, we recommend doing so to any screw that is NOT fully tight (don't over-tighten the Zen Pins, they may need adjusted along with the pivots to get a free swing). We are MUCH better at tuning now, and most pieces will have ALL screws fully tight, but it is up to the buyer to apply any threadlocker if needed. Knife accessories are available here...

ATTENTION:

These are clones, and we carry what people ask us to. If you do not support clones... do not buy one. Wasn't that easy :)

Please Note: This is our 1st production run for V2, as new batches arrive, there may be minor adjustments or improvements that will vary slightly. This is an EXTREMELY complicated design to make so many parts/mods all be compatible. THIS IS NOT A BEGINNER BUILD.

Please Note: Although we encourage you to explore your own mods/preferences, we HIGHLY RECOMMEND you have US do the modding process for you to ensure compatibility. We will have an easier time swapping to a different part if something is slightly thicker/thinner than the next. Just 1 tiny variance in a part can throw off the whole build. Assistance is only a phone call away....

Please Note: In order to achieve the desired 'muffled sound' from channel spacers, they need to be installed tightly against the zen barrel and pinched between the liners. Depending on your clone brand/channel gap, you may need a specific spacer thickness to be compatible.

Please Note: It can be very misleading when you take a perfectly tuned bushing, then put in the channel spacers. The small difference of pinching on to the spacer makes the bushing 'appear' to be now undersized, which just isn't true but makes your head spin trying to get the pivot cranked. You don't need to crank your pivot to get the perfect tune. With the channels it's better to leave it backed off a hair because of the slight bending of the liner at the zen. 

Please Note: If your channel spacer is THINNER than the shoulders of your zen barrel (spacing between the liners at the zen) then the tips of your channel spacers WILL NOT be pinched and held tightly.... leaving them floppy and NOT functioning properly.

Please Note: In some cases, you may need to slightly drill out/enlarge the holes for the spacers to help them align properly with your brand. Be aware it's not always a perfect fit and may require slight modification. If you are not capable of this skill, please purchase the entire knife through us and we will happily do it for you. Time = Money.

Please Note: Our default channel gap (space between the liners) is set to 4.2mm. Our current damascus blades (3.0mm) are thinner than our vg10 blades (3.2mm), so depending on which blade you mount, you may need .5mm or .6mm washers to fill the same gap. Mounting with the wrong washer thickness will give undesired results.

Please Note: Paired with the previous statement.... spacer thickness must ALSO match up with zen barrel thickness, which also must match blade/washer thickness to achieve the 'perfect tune'. Changing ANY of these thicknesses will give undesired results.

Please Note: SOME parts will be compatible between other brands. such as Armed Shark or Baliplus v3 (current rep clones). SOME parts are not. To ensure best results, we recommend using OUR entire platform as minor adjustments have been made to certain parts, to allow our unique mods.

Please Note: You must read our DISCLAIMER before purchasing. Check your laws. Absolutely no sales to minors.